NanoStation 2 CPE AP, Bridge w/ 10dBi Antenna & RP-SMA jack.POE.Stock

Art.No.: NS2

[+] zoom

NanoStation 2 CPE / AP/ Bridge w/integrated 10dBi Antenna & RP-SMA connector

No ratings.

This item is not in stock and must be reordered.

recommend Please login to access Wish List.

NanoStation 2 CPE AP, Bridge w/ 10dBi Antenna & RP-SMA jack.POE.Stock

Functions as a Wireless Access Point or Bridge. Includes Pole Mount hardware. Mount for window or wall sold separately.
RP-SMA female connector enables addition of external antenna: See options below ("Related Items" toward bottom of page).
Includes Power over Ethernet (POE) adapter (and regular power supply).
Simple configuration through web-interface

The Ultimate CPE for the Global WISP Community

Nanostation packs some phenomenal performance with a revolutionary design combining a hi-gain 4 antenna system, advanced radio architecture, and highly researched and developed firmware technology allowing throughput, stability, and capacity performance rivaling even the highest-end WiMax networks.

Featuring Powerful AirOS Software and Linux SDK

NanoStation ships standard with the powerful and intuitive AirOS by Ubiquiti Networks. It also is supported by a Linux SDK to encourage open source development.

Reliable System Performance

NanoStation has been proven in extreme temperature and weather conditions. Additionally, it has advanced ESD/EMP immunity design to protect against common outdoor radio and ethernet failures and eliminate truck-rolls for carriers.

SYSTEM INFORMATION
Processor Specs				Atheros MIPS 4KC, 180MHz
Memory Information				16MB SDRAM, 4MB Flash
Networking Interface				1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface

REGULATORY / COMPLIANCE INFORMATION
Wireless Approvals				FCC Part 15.247, IC RS210, CE
RoHS Compliance				YES

RADIO OPERATING FREQUENCY 2412-2462 MHz
TX SPECIFICATIONS					RX SPECIFICATIONS
	DataRate	TX Power	Tolerance			DataRate	Sensitivity	Tolerance
802.11b	1Mbps	26 dBm	+/-1dB		802.11b	1Mbps	-97 dBm	+/-1dB
	2Mbps	26 dBm	+/-1dB			2Mbps	-96 dBm	+/-1dB
	5.5Mbps	26 dBm	+/-1dB			5.5Mbps	-95 dBm	+/-1dB
	11Mbps	26 dBm	+/-1dB			11Mbps	-92 dBm	+/-1dB

802.11g OFDM	6Mbps	26 dBm	+/-1dB		802.11g OFDM	6Mbps	-94 dBm	+/-1dB
	9Mbps	26 dBm	+/-1dB			9Mbps	-93 dBm	+/-1dB
	12Mbps	26 dBm	+/-1dB			12Mbps	-91 dBm	+/-1dB
	18Mbps	26 dBm	+/-1dB			18Mbps	-90 dBm	+/-1dB
	24Mbps	26 dBm	+/-1dB			24Mbps	-86 dBm	+/-1dB
	36Mbps	24 dBm	+/-1dB			36Mbps	-83 dBm	+/-1dB
	48Mbps	23 dBm	+/-1dB			48Mbps	-77 dBm	+/-1dB
	54Mbps	22 dBm	+/-1dB			54Mbps	-74 dBm	+/-1dB

RANGE PERFORMANCE
Outdoor (BaseStation Antenna Dependent):					Over 15km

INGRATED ADAPTIVE ANTENNA POLARITY + EXTERNAL ANTENNA SUPPORT (4 OPTIONS TOTAL)
Gain		10dBi (2400-2483.5MHz)			External Connector		RP-SMA female
Polarization		Multi-Polarized			3dB Beamwidth Elevation		30 degrees
Polarization Selection		Software Controlled			3dB Beamwidth Azimuth		60 degrees

PHYSICAL / ELECTRICAL / ENVIRONMENTAL
Enclosure Size					26.4 cm x 8 cm x 3cm
Weight					0.4kg
Enclosure Characteristics					Outdoor UV Stabalized Plastic
Mounting Kit					Pole Mounting Kit included. Mount for window or wall sold separately.
Max Power Consumption					4 Watts
Power Supply					12V, 1A (12 Watts). Supply and injector included
Power Method					Passive Power over Ethernet (pairs 4,5+; 7,8 return)
Operating Temperature					-20C to +70C
Operating Humidity					5 to 95% Condensing
Shock and Vibration					ETSI300-019-1.4

SPECIFICATIONS


CPU	Atheros 180MHz MIPS
RAM	16MB RAM
Flash	4MB FLASH
Wireless	2.4GHz, 802.11b/g
Channel width	5/10/20MHz
Antenna Gain	10dBi x2
Polarity	Adaptive Vertical/Horizontal
Ext. Ant. Option	Yes, RP-SMA Connector
Range	15km+ (100km using ext ant.)
Throughput	25Mbps+ TCP/IP
Mounting	Pole Mount (straps included)
Accessories	Ubiquiti Window/Wall Mount (sold separately)
Size	26.4cm x 8cm x 3cm
Weight	0.4 kg
Power Supply	12V, 1A POE (included)
Approvals	FCC 15.247, IC, CE